1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 75Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 75

Assembly 1Place leaf valves on leaf plateIf new valves do not seat on the leaf plate, turn the leaf valves overLeaf valve
4Apply aw::: Screw Lock to mounting screwsWipe off excess adhesive5Assemble leaf valve and leaf stopInstall two screwsDo
not tighten 6Hold leaf valve assembly in horizontal positionThis will usually align leaf valves over ports in leaf plateTighten
the two screws evenly7Use sharp pencil to mark the edges of leaf valves []] 8Use pencil eraser to gently open the leaf valves
to check the alignment of the valve over the portValves should be spaced evenly over portIf not, loosen mounting screws and