1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 80Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 80

3Lubricate all contact points and replacement components with Johnson or Evinrude Outboard LubricantAssembly [] 1Position
the small spring is located over the button Q) inside the coverRotate the cover to align the cover and housing exactly as
during disassemblyPress the two together and secure with two screws and washers GIl 3Install the mixing unit bracket and
secure with six screws Tighten all eight screws and to 5-7 inIbs(0,6-0,8 Nm)4Carefully install the oil piston seal into the