1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 98Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 98

Installation 1Install the flywheel key with its outer edge parallel to centerline of crankshaft and single upset mark facing
Servicing Check the two wi ndows of the encoder for broken cracked corners or an accumulation of dirtClean or replace he
encoder if neededApply OMC Locquic Primer and OMC Nut Lockto the three retaining screws Tighten the screws to 24-36 inIbs(2,7-4,1
Nm) Spark Plug Information The spark plugs should be removed and examinedA spark plug should be replaced if the electrodes
are badly worn, if it has cracked insulator, or is badly fouledBefore installing the spark plug lead cover on the spark plug,
apply light coating of OMC Triple-Guard grease to the ribbed portion of the spark plug ceramic and to the opening of the