1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 104Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 104

Ignition Component Servicing Removal 1Remove flywheel[}] 2Disconnect stator plug and sensor plug at the ignition module,
to 5Remove securing the Remove the 6Remove the primary wires from ignition coils 7Remove the tanblack no-oil sender lead
from the ignition module 2-pin Amphenol connector using OMC Pin Removal Tool, PIN 322698Remove and disconnect the ignition
module 4-pin Amphenol connector [[] 8Remove three screws retaining the ignition moduleRemove ignition module ground screw