1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 126Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 126

Retaining Ring Pliers NOT E: USE UT ICA TOOL COINC CATNo226 612 HCS EDP No16226 11 Thermomelt Stik Procedure Twist and remove
remain dull and chalky0 0 4At 900 RPM, the 125 (52 C) mark should be liquid and glossy If the 1250 (52 C) mark does not remain
liquid and glossy, troubleshoot the cooling system for causes of over cooling If the 1630 (730 C) mark becomes liquid and
glossy, troubleshoot the cooling system for causes of overheating 5When the engine speed is increased to 5000 RPM, the 1630