1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 147Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 147

55Install one crankcase oiling hose recirculating hoses CD to the powerhead and three 56Install all carburetion, ignition,
to ensure thread engagement INotel Threading the lifting eye screws in too far into the flywheel will damage components mounted
to the underside of the flywheel 4Using hoist, carefully lower the powerhead onto the exhaust housingSecure with seven screws
coated with OMC Gasket Sealing CompoundTighten the screws to 180-204 inIbs(20-23 Nm)Remove the lifting eye 5Attach shift
arm to shift lever shaft and secure with screw and washerTighten the screw to 84-106 in.lbs(9-12 Nm) 6Position the manual
starter on top of the powerheadApply OMC Locquic Primer to the three manual starter screws and allow to air dryApply OMC