1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 148Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 148

OJ 7Connect the low oil light lead to the engine harnessSecure the connector to the ignition module ill 8Install the starboard
Nm) 10Place the shift and electrical cables in the lower motor cover grommet and secure in place in the lower motor cover
11Apply OMC Locquic Primer to the two trunnion anchor screws and allow to air dryApply CIVIC Nut Lock adhesive to the screwsAttach
the trunnion anchor block to the crankcase and secure with the two screws Tighten the screws to 84-106 in Ibs(9-12 Nm)12Attach