1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 151Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 151

InstallationRemote Models 1Coat both sides of new powerhead base gasket with OMC Gasket Sealing Compound and install it on
will damage components mounted to the underside of the flywheel[] 4Using hoist, carefully lower the powerhead onto the exhaust
housingSecure with seven screws coated with OMC Gasket Sealing CompoundTighten the screws to 180-204 inIbs(20-23 Nm)Remove
the lifting eye[[] 5Attach shift arm to shift lever shaft and secure with screw and washerTighten the screw to 84-106 inIbs(9-12
Nm) CiID 6Install the flywheel cover to the powerheadApply OMC Locquic Primer to the three cover screws and allow to air