1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 152Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 152

8Place the main engine cables into the motor cover grommet and install in the starboard lower motor coverRoute the cables
Nm)11 Secure the main engine cable to the starboard lower motor cover with J-clamp and screwTighten the screw to 84-106 inIbs(9-12
Nm) 12Attach the fuel line to the fitting in the port lower motor coverSecure with tie strap [] 13Install the port lower
motor cover and secure with six screwsTighten the screws to 84-106 inIbs(9-12 Nm) 14Connect 'the low oil light lead to the
engine harness and secure to the ignition module Connect the three TrimlTilt lead bullet connectors and route out of the