1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 173Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 173

Installation 1Slide the protective sleeve over the stop button leadsInsert the stop button leads and the throttle cable through
connector Secure connector in the bracket 5Secure wires to lower engine cover with J-clamp and screwTighten screw securely
[[] 6Install the electrical connector cover and secure with two screws Tighten the screws securely [[] 7Thread the connector
onto the cable housing 134 in(44 mm) from end of the cable sleeve 8Attach connector to bracket and secure with shoulder bolt
and spacer Tighten bolt securely 9Pivot bracket cover and tighten retaining screw securely 10Attach throttle cable ball socket