1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 181Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 181

8Install the shift bellcrank into the exhaust housingMake sure the inside and outside bushings are seated rn washer .the
rod to the bellcrank and secure with 12Install the gearcase as described in Section 613Install the powerhead as described
in Section 414Adjust shift detent as described in Section 1 Swivel Bracket Service Disassembly 1Remove the powerhead as described
in Section 42Remove the gearcase as described in Section 63Remove the exhaust housing as described in this section[[] 4Remove
two screws, lock nuts, and four flat washers securing the lower motor mount bracket to the pivot tube Safety Related Mirageeng