1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 185Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 185

0.62 in(15,7 mm) rn 2Apply OMC Triple-Guard greaseInsertinsidebushings into to the and outside surfaces of two new tilt tube
proper steering cable installation 5Apply OMC Triple-Guard grease to the tilt tubeInstall the tilt tube from the starboard
side of the stern bracketMake sure the tilt tube passes through both thrust washers 6Install second lock nut on the other
end ofthe tilt tubeHold the starboard lock nut with wrenchTighten the port lock nut to 50-54 ftIbs(68-73 Nm), then back the
nut off 18 to 1f4 turn 7Tilt the swivel bracket upPosition the port and starboard tilt lock assemblies into positionInstall