1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 186Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 186

8Apply OMC Triple-Guard grease to the inside and outside of the lower bushing Q) and install it into the bottom of the swivel
with the metal plug CD facing Tighten the friction screw, if toward the steering friction screw equipped, just enough to
keep the block in placeOvertightening the friction screw will make installing the steering arm assembly difficult 11Apply
OMC Gasket Sealing Compound to the outside case of new upper seal Use suitable tool and drive the seal into place until flush
with the outside surfaceApply OMC TripleGuard grease to the seal lips [g] 12Apply light coat of OMC Triple-Guard grease to