1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 193Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 193

Water Pump Servicing Disassembly 1Remove gearcase assembly as described in Gearcase Servicing, this Section 2Remove and discard
housing21219 into the impeller 2Apply OMC Triple-Guard grease to the two impeller housing a-ringsInstall the small, thick
shift rod a-ring Place the large a-ring into the impeller housing 3lightly coat the exterior of the impeller cup with OMC
Gasket Sealing CompoundAlign tabs of the impeller cup with location holes of the impeller housing and install the impeller
cup into the impeller housing 4lightly coat the impeller cup with oilInstall the impeller into the impeller cup with counterclockwise