1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 194Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 194

6Apply OtIC Adhesive Mto the groove on the underside of the grommet Install grommet onto the impeller housing7Lightly oil
the cam INote Verify thatthe impeller engages the impeller cam properlySerious powerhead damage will result if impeller cam
is displaced 9Lightly coat both sides of new impeller plate gasket with QVIC Gasket Sealing CompoundPlace gasket on the gearcase10Place
the impeller plate over the gasket [[] 11Slide the driveshaft down into the gearcase and engage the pinion[]] 12Turn the
driveshaft until holes ofthe impeller housing are aligned with holes of the gearcasePlace the washers on the six impeller