1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 197Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 197

Disassembly [] 1Remove the six impeller housing screws2Pull up on the driveshaft and remove the driveshaft with the water
Screws, -20 in(obtain locally) PIN 307639 Flat Washers CD PIN 307638 Handle 6Remove the retaining ring using OMC Retaining
Ring Pliers, PIN 331045The retaining ring is under extreme pressure during removal and installationWear safety glasses and
proceed with care to avoid unsnapping the ring from the pliersAfter the retaining ring is removed far enough from the gearcase
to clear the housing, release the tension on the pliers while the retaining ring is still around the propeller shaft7Remove