1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 199Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 199

rn 15Use ate Bearing Puller, PIN 432130, attached to OMC Slide Hammer, PIN 432128, to remove the forward bearing cupSecure
PIN 326582 Rod PIN 326583 Pilot Plate PIN 326577 Remover and Installer -20 112 inHex Head Screw -20 inHex Head Screw 1 in0.0Flat
Washer Place the tool in the gearcaseUsing mallet, drive the pinion bearings into the gearcase propeller shaft cavityDiscard
the bearings 19Remove the shift rod bushing as follows: Position ate Shift Rod Bushing Remover, PIN 327693 Q), under the
shift rod bushing Thread the adapter of the universal slide hammer in the slide hammerPlace the adapter through the shift
rod bushing and thread into the remover tool Q) Remove the handle from the remover toolThen remove the bushing from the gearcase