1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 207Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 207

37Fill the gearcase with 9-11 flo oz(264-330 ml) lubricant as follows: Secure the gearcase in an upright position Remove
LubeDo not coat top surface of the driveshaft as the lubricant here may prevent seating of the driveshaft in the crankshaftCoat
upper shift rod with Q1C Triple-Guard grease2Temporarily install the upper shift rod connector on the gearcase lower shift
rodInstallation of the gearcase will not allow the upper shift rod connector to be installed at later time3Install the gearcase
onto the exhaust housing See that the driveshaft engages the crankshaftRotate the flywheel, if necessary[] 4Apply Q1C Gasket