1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 210Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 210

7Remove the last extension mounting bolt located in the exhaust passage ofthe extensionRemove the extension from the exhaust
1Install the spacer onto the extensionNo sealer is required 2Apply OMC Adhesive to the groove on the underside of the grommet
Install the grommet on top of the spacer Installation []] 1Using two of the long extension mounting screwsinstall the extension