1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 216Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 216

[]] 5Remove the retaining ring, and lift the pawl and links as an assembly [[] In6Hold the spindle nut under the housing,
and inspect the links4Remove starter rope from pulleyInspect rope and replace if frayedCut new rope 59 in(150 em) longFuse
112 in(12 mm) of both ends and pull through towel to make threading rope through holes easier5Examine the pulley and the
starter housingLook for sharp edges and rough surfaces that could fray the starter ropeFile and polish to remove6Examine
starter lockout partsReplace any worn or damaged parts, Assembly InWear safety glasses while disassembling and assembling
manual starters because of rewind spring tension1Lubricate starter housing, spring, and pulley bearing surfaces with OMC