1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 228Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 228

Starter System Voltage Drop Test By making systematic check of the starter system, any component or electrical connection
leads only while the engine is crankingor damage to the voltmeter can occur2Connect voltmeter negative lead to the starter
side of the starter solenoid terminalWhile cranking engine, connect voltmeter positive lead to starter solenoid opposite
terminalVoltage reading should not exceed 0.2 voltRemove voltmeter positive lead from starter solenoid and stop cranking
engine3Connect voltmeter positive lead to starter solenoid, starter lead terminalConnect voltmeter negative lead to starter
motor terminalTurn key switch to STARTVoltage reading should not exceed 0.2 volt4Connect voltmeter positive lead to battery