1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 237Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 237

rn armature c:wc EPIWheel Bearing Grease to the brush holder 8Apply cap bearing9Correctly route the brush leads and install
and slide putty knife out, making sure the brushes are retained properly 12Apply Ct1C Locquic Primer and CWIC Screw Lock
to the threaded portion, and install the two thru boltsTighten to 50-60 inIbs(5,6-9 Nm) [j]] 13Attach solenoid with bracket
to starterAttach solenoid strap to starter postTighten screws and nut securelyCoat strap, post, and nut with CWIC Black Neoprene