1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 34Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 34

Off-Season Storage Use the following procedure to properly prepare Johnson and Evinrude outboards for extended periods of
of fuel Two quarts of OMC Storage Fogging Oil One pint of Johnson or Evinrude Outboard Lubricant 21f2 ozof OMC 2+4 fuel conditioner
4Connect the tank containing the "storage mixture" to the engineLeave the oil supply hose line connected to the engineRun
the engine on the "storage mixture" at approximately 1500 RPM for five minutesI Note Do not disconnect fuel hose or run equipped
engines out of fuelDisconnecting fuel hose while engine is running could cause excessive oil consumption and eventual hard
starting 5Stop engine and remove all spark plugsSpray liberal amount of OMC Storage Fogging Oil into the spark plug holes6Turn
flywheel in clockwise direction to distribute the fogging oil throughout the cylindersInstall and torque the spark plugs
7Prevent accidental starting during storage; leave spark plug leads off all of the spark plugs 8If engine is equipped with