1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 75Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 75

Assembly 1Position the spring and washer on the plunger shaftr:J6l 2Install two new a-rings and quad-ring onto plunger shaft
mm) piece of hose to the large nipple and place the other end of hose in container of alcoholConnect hose to the small nipple
and place other end of hose to drain into containerHold primer pump in horizontal position as it would be installed on the
engineMove plunger back and forth ten timesPrimer should pump approximately 10 cc of alcohol in ten strokesIf pump fails