1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 119Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 119

Ignition Plate ServicingCD IIAmp Removal i twist and remove all spark plug leads '" 1To avoid accidental starting of engine
of the four support plate screws Install and tighten the screws to torque of 48-60 inIbs(5-7 Nm) ] 2Apply OMC Moly Lube to
crankcase bossf41 3Lubricate the ignition plate bearing groove with OMC Moly Lube1sl 4Apply OMC Nut Lock to the threads of
the five ignition plate screwsInsert needle-nose pliers into slots in the ignition plate bearing and compress bearing while
guiding the ignition plate into position5Align the ignition plate with the retainer plateTighten the five screws to torque
of 25-35 inIbs(2,8-4,0 Nm)6Connect and adjust spark advance linkRefer to Synchronization and Linkage AdjustmentsSection 17Check