1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 129Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 129

Ohmmeter TestStop Button lNotel All ohmmeter tests must be performed with the engine NOT running ] 1Most steering handles
To stop the engine when the clip and lanyard assembly is in place, press the stop button until the engine stops2Install the
clip and lanyard lsi 3Calibrate an ohmmeter on appropriate scaleConnect meter leads between ignition plate end of connector,
terminal "E", and clean engine ground The meter must show high reading4Momentarily, press inward on the stop button The meter