1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 131Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 131

STEPCHARGE COIL TEST Ground Test 1Disconnect 5-pin Amphenol connector 2Set peak-reading voltmeter to "POS" and "500"f71 3Alternately,
and repair ground, or replace charge coil Rope or Amp PCE0068 4If no reading is indicated in Step 3, go to Output TestOutput
Test 1Set peak-reading voltmeter to "POS" and "500" 1al 2Attach voltmeter black lead to charge coil terminal "A"Attach meter
red lead to the other charge coil terminal3Crank engine and observe meter reading: If meter shows 230 volts or higher, go