1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 149Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 149

[] 8Remove the six main bearing screws (]J [!Q] 9Using soft face mallet, tap upward on the crankshaft to separate the crankcase
be installed in their original positions 11Using OMCTorque Socket, PIN 331638, loosen in stages and remove the connecting
rod screwsRemove caps and set the bearings aside12Lift the crankshaft from the cylinder block 13Reinstall the rod caps on
their original rodsInstall the screws finger tight 114114Remove the upper main bearing from the crankshaftDiscard the seal