1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 151Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 151

1221 24Remove the ten cyli nder head screwsRemove the cylinder head and discard the gasket 1231 25Remove the temperature
on Page 4-8 or OMCRetaining Ring Pliers, PI 325937, remove all wrist pin retaining ringsDiscard retaining rings 12711281
29The fit between the wrist pin and bosses of the piston is loose on both sidesPush the wrist pin through to free the piston
from the connecting rodIf necessary, use OMC Piston Cradle, PI 326573, and OMC Wrist Pin Pressing Pin, PIN 326356With the
piston skirt flush with the cradle, press out the wrist pin using an arbor pressBe careful not to lose any ofthe 28 needle