1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 157Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 157

14Apply OMC Gasket Sealing Compound to outside diameter of temperature switch and install in cylinder headInstall sending
crankshaftWhen pressing on the bearing, support the crankshaft between the two lower counterweights and press against the
lettered side ofthe bearingInstall the retaining ring in groove of the crankshaft with sharp edge of the ring facing away
from bearing [)]] 20Oil the upper main bearing surface of the crankshaftSlide the upper main bearing onto the crankshaft
with seal facing the flywheel end of crankshaft 21Lightly coat the center main journal of the crankshaft surface with outboard