1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 160Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 160

32Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using
rodThe groove lines on the jaws must be centered on the rodcrankpin diameter INote The must be followed to assure frame is
squarely position 134 33Tighten the forcing screw to torque of 23 inIbs(2,5 Nm)34Loosen both rod cap screws V4 turn135 35Apply
preliminary torque of 40-60 inIbs(5-7 Nm) to both rod cap screws36Apply final torque of 30-32 ftIbs(40-43 Nm) in two alternate