1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 180Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 180

f1518Using punch and mallet, drive out the steel pin that retains the inner handle in the steering handle '16l9 Remove the
the steering handle components for wear, cracks, or damageReplace parts if necessaryPut protective sleeves on throttle cable
and terminal wires 3Refer to Ignition System, Section 3, to test stop switchAssembly 1Install the throttle cable seal into
inner handle If removed, apply Loctite Depend 300 adhesive to inner handle at areas shown 1 and drivethe metal outer handle
over the plastic inner handle 1813Install the outer handle into placef1514Secure tab of the inner handle into recess of the