1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 183Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 183

Exhaust Housing Servicing40RS, 40, 48, 50 Removal 1Remove the powerhead as described in Section 42Remove the gearcase as
screws7Lift the exhaust housing assembly from the swivel bracketDisassembly lsi 1Remove the four inner exhaust housing to
exhaust housing screwsf612Using soft face mallet, tap on side of the inner exhaust housing to break the seal between the
inner and outer housing looseLift the adapter from the exhaust housing 03Remove the four screws retaining the exhaust relief