1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 190Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 190

Unit Replacement 1Raise motor to full tilt position and engage tilt supportLower motor until tilt support rests on stern
one of the 3J4 inlocknuts from the lower tilt pinRemove the pin from the stern brackets6Remove unit and bushings from stern
brackets7To install the hydraulic unit, lubricate the cylinder and tilt pin bushings with OMC Triple-Guard greaseInstall
the bushings8Position the hydraulic unit between the stern brackets9Lubricate the lower tilt pin with OMC Triple-Guard greaseInstall