1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 196Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 196

5Assemble the port and the starboard stern brackets onto the swivel bracketInstall the tilt shaft bolt through the following
the 78 inhead screw through the port stop linkwave washerand port stern bracketInstall and tighten the nutto torque of 144-168
inIbs(16-19 Nm)Install the 3f4 inhead screw through the starboard stop link and stern bracketInstall and tighten the nut
to torque of 144-168 in.lbs(16-19 Nm) 128112919Install the large setscrew in the swivel bracket, one thread from being flush
with the castingIf these screws are not patchlock screws, apply OMC Ultra Lock to threads of screws before installing Place
the steering friction bushing in the swivel bracket with groove in line with the setscrews Apply OMC Triple-Guard grease