1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 212Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 212

Propeller Shaft Bearing Housing Servicing Inspect the bearings in placeIf bearing is removed for any reason, it must be replaced
with lettered side of the bearing facing the toolInstall the bearing until the tool contacts the housing 13411351 3Install
new seals back to back in the rear of the bearing housing using OMC Seal Installer, PIN 910585, or 326556Apply OMC Gasket
Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing toward the bearing
housing and install the outer seal with lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal
lips after installing4Lightly apply OMC Triple-Guard grease to new bearing housing a-ringInstall the a-ring in groove of