1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 215Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 215

Assembly INotel Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable
into the gearcaseDrive bearing in the gearcase until the spacer4Remove he toolPosition new seal on the pinion bearing retaining
screwApply OMC Nut Lock to threads of the screwInstall the screw and tighten to 48-80 inIbs(5-9 Nm)5Using OMC Forward Bearing
Service Kit, PI 433034, and OMC Drive Handle, PI 311880, install two new forward gear bearings in the gearcase as follows:
Place the gearcase in vertical position on the floorSupport nose of the gearcase with wood W Place drive handle through the
step plateAssemble the Place the short bearing on the installer tool with lettered side of the bearing facing the tool[[]
bearing installer to the drive handle to install the short bearing Insert the tool with the bearing into the gearcaseDrive