1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 249Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 249

Assembly]1If the reverse gate was removed during disassembly, install reverse gatebushings ,and shafts to jet housingPosition
nut , and cam screw Before tightening cam screw, adjust reverse gateRefer to Gate Adjustment 6Apply OMC Adhesive sealant
to the spacer and jet drive housing mating surfacesPlace the spacer on the jet drive housing7Install water pump assembly
to jet housingRefer to Water Pump ServicingDo not use the impeller plate gasket on Jet modelApply OMC Gasket Sealing Compound
to the impeller plate before installing8Coat driveshaft splines with OMC Moly LubeDo not coat top surface of driveshaft as