1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 252Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 252

r;"J f:;] 9Assemble remaining shims, new tab-lock washer, and impeller nut onto driveshaftTorque impeller nut to 16-18 ftIbs(22-24
1Move remote control handle to NEUTRAL detent 101 2Hold reverse gate up and check for proper clearance l!J between reverse
gate and water flow passage: in(23,9 mm) 3If adjustment is required: Loosen cam screw Rotate cam eccentric nut while holding
reverse gate up, until proper clearance is achievedTighten cam screw and recheck adjustment4Move remote control handle to
FORWARD detent 19l When the roller is in FORWARD positionapply hand pressure to move the reverse gate up, toward NEUTRALIf