1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 270Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 270

Starter Circuit CheckTEL, TTL i ing with this check Avoid accidental starting while testing; disconnect the starter cable
key switch ONConnect voltmeter between and ground IIIf meter shows 12V, go to Step IIIf meter reads OV, go to Step II Check
voltage between and ground If meter shows 12V, replace start button andor wire If meter shows OV, go to Step Check voltage
between ground If shows 12V, go to Key Switch Check, this sectionCheck wire to terminal strip If meter shows OV, go to Step
Check voltage between and ground Connect voltmeter between and ground If meter shows 12V, replace fuse, holder, or wire to
key switch If meter shows OV, replace wire from solenoid terminal to fuse 0 Check voltage between and ground Disconnect black
ground wires from Connect voltmeter between solenoid terminal and groundTurn key switch ON Push start switch If meter shows
12V, repairreplace black wire between and ground If meter shows OV, disconnect all leads from solenoid, and test solenoidGo