1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 272Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 272

Starter Circuit CheckRemote INote Battery must be fully chargedStep Check voltage between ground and G) Procedure Remove
to START position after connecting aIf meter reads battery voltage, lead is open between G) and INotel Steps EJ thru IITurn
bIf no reading, go to Step Check voltage between ground and Connect meter at Turn key to START position aIf meter reads battery
voltage, solenoid is faultybIf no reading, go to Step II Check voltage between ground Connect meter at Turn key to START
position aIf meter reads battery voltage, lead is open between and or neutral start switch ;s open or improperly adjustedbIf
no reading, go to Step II Check voltage between ground Connect meter at Turn key to OFF position aIf meter reads battery