1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 278Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 278

Solenoid Check All engine wiring must be disconnected from the solenoid before proceeding with this test Calibrate ohmmeter
Dip No Load Current Draw, Electric Starter Securely fasten starter in vise or other suitable fixture before proceeding with
this check 1Locate battery rated 350 cold cranking amps or higher that is in good condition and fully charged2Connect 0-50
amp ammeter in series with heavy ju mper between the battery+" terminal and the starter "+" terminal3Attach or hold vibration
tachometer, suoh as Frahm Reed tachometer, to the starter4Complete the circuit with heavy jumper between the battery "-terminal