1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 308Get this manual

1995 Johnson/Evinrude Outboards 40 thru 55 2-Cylinder Service Manual, Page 308

Power Supply Troubleshooting Before beginning this procedure: Charge battery and connect battery cables Turn key switch OFF,
at terminal strip, check wire If voltage at V1go to Step 5 [!] 5Push UP trim buttonCheck for voltage at V2 (bluewhite): If
no voltage, check trim switch's redpurple wire If voltage, go to Step 66Reinstall UP relayPush blades only halfway into bracket
in UP (blue) end of bracketDR3950 f1l f21 7Check for voltage at V3 t=J relay): on relay blade (M terminal of If no voltage,
go to Relay Ohmmeter Test If voltage, go to Step 88Disconnect trim motor's blue and green power wire connector (leave relay
in bracket)9Push UP trim buttonCheck for voltage on blue wire: If no voltage, check blue wire from relay bracket to motor