1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 30Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 30

Off-Season Storage Use the following procedure to properly prepare Johnson and Evinrude outboards for extended periods of
of fuel Two quarts of OMC Storage Fogging Oil One pint of Evinrude or Johnson Outboard Lubricant 2112 ozof OMC 2+4 fuel conditioner
4Connect the tank containing the "storage mixt ure" to the engineLeave the oil supply line connected to the engineRun the
engine on thestorage mixture" at approximately 1500 RPM for five minutes INote DO NOT disconnect fuel line or run equipped
engines out of fuelDisconnecting fuel line while engine is running could cause excessive oil consumption and eventual hard
starting 5Stop engine and remove all spark plugsSpray liberal amount of OMC Storage Fogging Oil into the spark plug holes6Turn
flywheel in clockwise direction to distribute the fogging oil throughout the cylindersInstall and torque the spark plugs
7Prevent accidental starting during storage; leave spark plug leads off all of the spark plugs8If engine is equipped with