1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 33Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 33

Preseason Service 1Check gearcase lubricationIf leakage is evident, gearcase seals may need attentionCheck lubricant level
terminals to check battery conditionInstall and connect battery4When engine is reattached to the boat's transom, make ill
sure the steering, shift, and throttle systems are attached to the engine using the special locknuts, lock bolts, and any
other special fasteners stored with the engine earlierFollow the manufacturer's installation instructions! If control systems
are attached to the engine using the wrong fasteners or assembled carelessly, sudden unexpected loss of engine control may
result5Test engine warning hornSee Warning Hornthis section6For models with If oil line has been disconnected, the oil line
must be purged and the system primed before any attempt is made to start the engineRefer to Section 2, OMC Any time that
the VRO oil supply line has been disconnected from the engine, you must run 50:1 fueloil mixture in the fuel tank for period