1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 40Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 40

Synchronization and Linkage Adjustments 50, 60, 65WM, 70 Remote Control NoteIt is important that this step-by-step procedure
cm) past the timing pointer( rn andInstall in center portion PIN 384887, in No.1No.1 piston3OMC Piston Stop, spark plug hole
turn until it contacts the Lock the tool in place with ring 4While holding the flywheel firmly against the tool, mark the
flywheel directly across from the pointerConsider this mark A" 5Continue to turn the flywheel in clockwise direction until
the piston contact is felt againMark this exact spot on the flywheel and consider this mark "8"Remove the piston stop tool6Use
flexible scale along the flywheel edge and measure the midpoint between marks "A" and "8"Mark the midpoint on the rim of
the flywheelConsider this mark "C"If the mark "c" and the cast-in mark are in agreement, the timing pointer alignment is
correctIf not, proceed to Step 7 7Turn the flywheel to align the mark "c" with the pointerHold the flywheel in this positionLoosen