1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 43Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 43

4Stop the engineTo adjust, turn the adjustment screw in or out, as necessary, to correct the timingTurning the screw clockwise
the engine with the proper test wheelDo not run the engine with propeller or flush adapter for the adjustment1Connect timing
light to the No.1 cylinder2Start engine and allow it to reach normal operating temperatureShift to FORWARD gear and run the
engine at minimum of 5000 RPM26425 3The engine timing pointer must align with correct degree mark on the flywheel grid Maximum
Spark Advance 25, 50, 60, 65WM, 70 PCE0026 4Stop the engineTo adjust, loosen the timing adjustment screw nutTurn the adjustment