1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 83Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 83

Inspection [] 1To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite
come out both outlet fittings 3To inspect or replace internal components, remove the four solenoid cover screws [] 4When
assembling solenoid, back up screws in their holes to engage original threads and tighten securelyInstallation 1Attach purplewhite
leads and three hosesSecure large hose with tie strap2Install solenoid and bracketPosition ground lead under the inside bracket