1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 89Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 89

2Install float valve seat and gasket [g] 3Install inlet needle, clip, float, and hinge pin 4Adjust float levelInvert the
gasket 8Apply OMC Locquic Primer and OMC Screw Lock to the float chamber screws 9Install float chamber and four screwsTorque
screws in an "X" pattern to 25-35 inIbs(2,8-4,0 Nm)10Install the carburetor body cover and gasketTighten the screws in an
"X" pattern to torque of 15-22 inIbs(1,6-2,4 Nm) 11Install intermediate air bleed orifice 8-10 inIbs (0,8-1,2 Nm)12Install
high-speed orifice (0,8-1,2 Nm) to torque of to torque of 8-10 inIbs 13Install slow speed needle and spring until it lightly