1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 107Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 107

Power Test Do not exceed the coil's maximum specified amperage when testing itThe ignition coil is tested with "normal" polarity
amperage when testing itThe ignition coil and spark plug lead should be tested for leakage and insulation failures using
the ignition testerLeakage is caused by moisture, cracks, or holes in the coil housing or spark plug leadsr;;] With the tester's
small black and red leads still connected, remove the tester's high tension lead from the coilTurn on the tester and probe